Reelmaster 5200-D & 5400-D

Reelmaster 5200-D & 5400-D

Reelmaster 5200-D

Reelmaster 5400-D

Kubota® liquid-cooled diesel, 3-cylinder, 28 hp (20.9 kW) gross @ 3000 RPM, 25 hp (18.7 kW) net @ 3000 RPM. 68.5 cu. in. (1123 cm3) displacement.

Kubota liquid-cooled turbo diesel, 3-cylinder, 35 hp (26.1 kW) gross @ 3000 RPM, 31.5 hp (23.5 kW) net @ 3000 RPM. 68.5 cu. in. (1123 cm3) displacement.

Mid-mounted radiator with industrial tube and fin construction; 7 fins per inch. 7.5 quart (7.1 liter) capacity.

10 gallon (37.9 liter) diesel fuel.

2WD: Power to the front drive wheels is via a hydrostatic transmission coupled to a mechanical drive axle.
4WD: Toro® 4-Matic® on-demand 4-wheel drive, consists of drive shaft connected to mechanical rear drive axle.

0-10 mph (0-16.1 km/hr) transport; 0-4 mph (0-6.4 km/hr) reverse; 0-5 mph (0-8 km/h) mow.

The Automatic Control Electronics, ACE™ system allows precision timing and control of machine functions for maximum reliability. Available diagnostic display connects to an electronic control unit to pinpoint any electrical problems quickly and easily. Available DATA LOG™ system allows mechanic to find intermittent problems.

Hour meter, speedometer, fuel gauge, temperature gauge, cluster gauge with glow plug and charge indicator lights, low engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).

Tires/ Wheels/ Pressure

26.5 x 14-12 front drive tires provide maximum traction ability while minimizing turf abrasion. 20 x 10-10 rear tires.

All welded formed steel frame, includes three tie-down loops.

Individual 7" x 1.75" (17.8 x 4.4 cm) drum type wheel brakes and parking brakes on front traction wheels. Hydrostatic braking through traction drive.

Power steering with dedicated power source.

Power steering, adjustable seat position, single forward and reverse traction pedal, traction speed limiter, brake pedals, parking brake latch, ignition key switch, PTO switch, throttle, joystick control for cutting unit raise and lower, reel speed and backlap control knobs.

Electrical and Interlocks

12 volt maintenance free battery, 530 CCA. Electronic control unit is a microprocessor-based, solid state control unit with diagnostic capabilities. Traction pedal, operator presence in seat, PTO engage or disengage safety interlock switches.

Reel Speed Control

Reel drive circuit is split into front and rear independent circuits. Hydraulic functions controlled by an integrated hydraulic control block. Reel speeds are manually adjustable between 300-2050 RPM (250 RPM in backlap).

Equal geometry independent suspension arms with positive down pressure to each cutting unit, adjustable to five settings in eight pound increments.

Deluxe high back suspension seat.

Height: 56" (142 cm) w/o ROPS
81.5" (207 cm) w/ ROPS
Length: 103.5" (263 cm)
Transport Width: 87" (221 cm)
Wheel Tread: 70" (178 cm) - front
Wheelbase: 58" (147 cm)

86 dB(A) under normal operating conditions.

This product complies with the American National Standards Institute (ANSI B71.4 – 1999) and European Community specifications (CE Certified).

Two year limited warranty. Refer to the Operator’s Manual for further details.

Five 21" (53 cm) wide welded reels, 5" (13 cm) diameter. Front or rear discharge. Fully interchangeable.

95" (241 cm) with five cutting units.

1/4 - 1" (6.4 - 25.4 mm) standard, 1/4 - 13/8" (6.4 - 34.9 mm) with optional high height of cut kit (P/N 83-5300).

HOC & Roller Adj.

Front roller: adjustable in 3 increments. Rear roller: screw adjustable with bolt clamp lock.

Reel Construction

Fairway designed reels with high carbon steel blades. All welded construction. 5" (13 cm) diameter reels.

Reel motors feature quick disconnect for removal/installation onto cutting unit.

Bedknife/ Bed bar

Opposed screw adjustment, replaceable bedknife mounted on a cast iron bedbar.

Manually controlled variable reel speed. On-board backlapping standard.

Front 3.0" (7.6 cm) Wiehle roller standard. Optional solid front roller. Rear roller 2.5" (6.3 cm) solid roller.