Reelmaster 6500-D & 6700-D

Reelmaster 6500-D & 6700-D

Reelmaster 6500-D

Reelmaster 6700-D

Kubota® V1505-T liquid-cooled diesel engine. 4-cylinder, over-head valve. 1.5 liter displacement. Turbo-charged. 46 hp (34.3 kW) gross rated, 42 hp (31.3 kW) net at 3000 rpm. 40 amp alternator. Donaldson two-stage air cleaner with safety filler and restriction indicator.

Rear mounted, cross-flow agricultural type radiator, 7 fins per inch. Cooling system capacity is 3.5 gallons (13.25 liters). Air to oil cooler with 2 rows, 6 fins per inch, mounted in front of radiator tips outward for cleaning. Removable oil cooler/radiator screen.

Electrical Features

12 volt, 650 cold cranking amperes at 0°F (-18°C), 105 minute reserve capacity at 80°F (27°C), maintenance free battery. 1.4 kW electric starter. 55 amp alternator with I.C. regulator/rectifier. Automotive type electrical system. Seat switch, reel and traction interlock switches.

Bosch® in-line fuel injection pump with energized-to-run (ETR) fuel flow solenoid. Replaceable spin-on fuel filter/water separator. Fuel capacity: 15 gallon (57 liter).

Hour meter, speedometer, fuel gauge, engine coolant gauge, and warning light cluster: engine oil pressure, high engine temperature, charge indicator, glow plug, water in fuel indicator, low water indicator. Reel control lamp that lights to indicate the reels are not providing desired clip.

The Automatic Control Electronics, ACE™ system allows precision timing and control of machine functions for maximum reliability. Optional diagnostic display connects to an electronic control unit to pinpoint any electrical problems quickly and easily. Available DATALOG™ system allows mechanic to find intermittent problems. Diagnostic test ports are provided for front and rear cutting unit drive, cutting unit lift, steering, and hydrostatic transmission charge pressure.

Power to the front drive wheel is via servo-controlled hydrostatic pump operating individual fixed displacement axial piston wheel motors that operate a planetary gear final drive assembly. Foot pedal control of forward/reverse ground speed. Toro 4-Matic® 4WD System only: couples rear drive axle to hydrostatic transmission via overrunning clutch for full time on-demand 4WD. A Roll Over Protection Structure (ROPS) and seat belt are standard on 4WD models.

0-10 mph (0-16.1 km/hr) forward; 0-4 mph (0-6.4 km/hr) reverse.

Tires/ Wheels/ Pressure

Two rear steering tires: 20 x 10-10, tubeless, 6-ply rating. Two front traction drive tires: 29 x 14-15, tubeless, 6-ply rating. Recommended tire pressure: 10-15 psi (59-103 kPa).

All welded steel frame includes tie-down loops.

Wet triple disc brakes on front planetary assemblies may be actuated individually for service brakes or locked together for transport or parking brakes. Dynamic braking through hydrostatic traction drive.

Power steering with dedicated power source.

Deluxe seat with adjustable suspension and fore-aft location. Optional Armrest Kit, Model 30707.

A 4-post ROPS with seat belt and optional canopy; standard on Models 03807 and 03808, optional on Model 03806.

Height: 60" (152 cm) w/o ROPS
84" (213 cm) w/ ROPS
Length: 120" (305 cm)
Transport Width: 84" (213 cm)
Operational Width: 110" (279 cm)
Wheel Tread: 72.25" (178 cm) - front
41" (104 cm) - rear
Wheelbase: 58" (147 cm)

Height: 84" (213 cm) w/ ROPS
Length: 120" (305 cm)
Transport Width: 84" (213 cm)
Operational Width: 147" (374 cm)
Wheel Tread: 72.25" (178 cm) - front
41" (104 cm) - rear
Wheelbase: 58" (147 cm)

82 dB(A) under normal operating conditions.

The Reelmaster 6000 series complies with American National Standards Institute (ANSI B71.4-1999) and European Community (CE) specifications with required weight kits and ballast installed.

Two year limited warranty. Refer to the Operator’s Manual for further details.

Five 22" (56 cm) width cutting units; fully interchangeable. Front or rear discharge selectable with movable shield.

Seven 22" (56 cm) width cutting units; fully interchangeable. Front or rear discharge selectable with movable shield.

133" (338 cm) with 7 cutting units, 114.5" (291 cm) with 6 cutting units, or 96" (244 cm) with 5 cutting units.

3/8-13/4" (9.5-44.5 mm) height of cut range. Recommended use: 5-Blade 1-13/4" (25-44 mm); 7-Blade 1/2-1" (12-25 mm); 11-Blade 3/8-5/8" (9.5-15 mm).

Reel Construction

All welded construction. 7" (17.8 cm) diameter reels.

Reel motors feature quick disconnect for removal or installation onto cutting unit. Cutting units can be driven from either end.

Bedknife/ Bed bar

Single point adjustment mechanism, .0005" (.0127 mm) adjustment per click.

.375-1.25" (9.5-31.8 mm). Reel speed is manually adjustable to maintain proper clip.

Front roller: 3" (7.6 cm) diameter Wiehle roller standard. Rear roller: 3" (7.6 cm) diameter Full roller. All rollers use the same heavy duty ball bearings with two conventional single lip seals and Toro labyrinth seal to provide four sealing surfaces to protect the bearings. Optional 3" (7.6 cm) diameter Full roller is available for the front position.